Blue antiqued finish
Materials:
220 Grit Sandpaper
mineral spirits
Sherwin Williams Proclassic Paint Halcyon Green 6213
Minwax Special Walnut Stain
120 grit sandpaper
Spray water based polyurethane Satin
Paper Towels
Tools:
Orbital Sander
lint free cloths
paint brush
Disclosure: This post includes affiliate links, which means I receive a small commission if you make a purchase through my links. There is no extra cost to you. Purchasing through my affiliate links help support my website so I am able to continue posting free content.
1. Sand your surface with 220 grit sand paper. Use shop vac to remove dust and wipe down with lint free cloth dampened with mineral spirits.
2. Apply 2 coats of Sherwin Williams Proclassic Halcyon Green 6213. Allow to dry. Sand with 220 between coats.
3. Sand again with 220 grit sandpaper removing some of the paint in the corners.
2. Apply 2 coats of Sherwin Williams Proclassic Halcyon Green 6213. Allow to dry. Sand with 220 between coats.
3. Sand again with 220 grit sandpaper removing some of the paint in the corners.
4. Apply Minwax Special Walnut Stain to edges where raw wood is showing.
5. Use a dry, lint free clothe to rub the stain over the wood removing most of it.
6. Allow stain to dry.
7. Spray with water based sealer.
7. Spray with water based sealer.